JUMO ATH-SW-22溫控器
產品詳情資料：
JUMO ATH-SW-22溫控器內部模塊診斷指示模塊OK（正常）和Configured OK（配置正常）狀態的單個LED指示輸出1至4 A狀態的可拆卸接線板，用于連接現場接線。輸入可以用作計數信號或邊緣敏感選通信號。輸出可用于驅動指示燈、電磁閥、繼電器和其他設備。操作模塊邏輯電路的電源來自底板底板上的5 VDC總線。輸入和輸出設備的電源必須由用戶或90-30系列電源的+24 VDC隔離輸出提供。I/O處理器模塊提供可選閾值電壓，以允許輸入響應5 VDC信號電平或10至30 VDC信號電平。JUMO ATH-SW-22閾值由配置選擇。通過內部診斷后，模塊的所有配置參數將從PLC下載到I/O處理器。成功配置模塊后，CONFIG OK（配置正常）LED將點亮?？墒褂镁幊?配置軟件或手持式編程器更改配置參數。JUMO ATH-SW-22
Internal module diagnostics ? Individual LEDs that indicate Module OK and Configured OK status ? Individual LEDs that indicate state of Outputs 1 through 4 ? A removable terminal board for connection of field wiring. Inputs can be used as count signals or edge-sensitive strobe signals. Outputs can be used to drive indicating lights, solenoids, relays, and other devices.JUMO ATH-SW-22Power to operate the module’s logic circuitry is obtained from the 5 VDC bus on the baseplate backplane. Power sources for the input and output devices must be supplied by the user or by the +24 VDC isolated output of the Series 90-30 power supply. The I/O Processor module provides a selectable threshold voltage to allow the inputs to respond to either a 5 VDC signal level or a 10 to 30 VDC signal level. The threshold is selected by configuration. All configuration parameters for the module are downloaded from the PLC to the I/O Processor after it passes its internal diagnostics. Once the module has been successfully configured, the CONFIG OK LED will turn on. Configuration parameters can be changed using the programming/configuration software or the Hand-Held Programmer.JUMO ATH-SW-22
品牌：JUMO
型號：JUMO ATH-SW-22
產品說明：溫控器
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
產 品 展 示
關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://kairanguanggao.cn
