產品內容介紹
CTI 2500-C300高速順序控制
系統配置B2.2.1組件FA-M3 Value版本（F3SC21-1N）由以下組件組成F3BU04-0N基本模塊-帶電源和內存的F3SP05-0P序列CPU模塊-F3WD64-3N I/O模塊有關F3BU04-0N和F3WD64-3N模塊及其他組件的詳細規格，請參閱其各自的相關章節。帶電源和存儲器的F3SPS05-0P順序CPU模塊包含與F3PU10-0N電源模塊等效的電源。本節介紹此內置電源塊的規格。序列CPU塊的詳細信息在“序列CPU–功能（用于F3SP21、F3SP25、F3SPS35）”（IM 34M06P12-02E）中進行了解釋。安裝F3SP08-0P或F3SP008-SP序列CPU模塊的單元主單元A的概念稱為主單元。因此，F(xiàn)3SC22-xx或F3SC23-xx本身就是主單元。子單元子單元用于增加I/O端口的數量。FA-M3系統的Value II最多可以添加七個子單元，以處理最多2048個I/O點。使用光纖FA總線模塊增加I/O點的數量您可以在主單元和子單元中安裝光纖FA母線或FA總線類型2模塊，并用光纜連接它們。這使得遠程I/O點的分布式布置、I/O點數量的增加以及通過高速、抗噪聲通信控制I/O模塊成為可能。光纖FA總線或FA總線類型2模塊可以安裝在插槽3或插槽4中。TIP■ 使用FA總線類型2模塊增加I/O點數的示例與光纖FA總線型號2模塊一樣，可以使用FA母線類型2模塊來增加I/O點數。FA總線類型2模塊使用屏蔽雙絞線連接子單元。
基本配置
FA-M3值II（F3SC22-xx，F(xiàn)3SC23-xx）由以下部件組成。參見圖C1.1了解具有各自模塊配置的可用模型F3BU04-0N基本模塊-F3SP08-0P序列CPU模塊，帶電源（帶M3.5螺釘）和內存-F3SPS08-SP序列CPU模件，帶電源和內存（帶M4螺釘）-F3WD32-3F I/O模塊-F3GD64-3F I/O模件-F3WD64-3P I/O模塊-F3WD64-4P I/O模塊-F3XD16-3F輸入模塊-F3YD14-5A輸出模塊如果FA-M3值II出現故障，只能通過更換故障模塊來修復。將F3SP08 xP序列CPU模塊安裝在F3BU04-0N基本模塊的最左側插槽中，并將其他I/O模塊安裝在插槽2（或插槽2和3）中。其余插槽3和4（或僅插槽4）是為FA-M3系列可用的各種I/O模塊保留的。插槽編號由三位數字組成，其中第三位數字是單元編號。單元編號0分配給主機。將F3SP08-0P順序CPU安裝在F3SC22-xx的插槽1中，并將F3SPS08-SP順序CPU模塊安裝到F3SC23-xx插槽1中。在插槽2（或插槽2和3）中安裝其他指定的組件模塊。您可以在其余插槽中安裝FA-M3 I/O模塊。您不能在剩余的插槽中安裝CPU模塊。有關I/O模塊（包括子單元）安裝的限制，請參閱第A1.2節“模塊安裝限制”，因?yàn)樗鼈兊韧谠摴?jié)中討論的F3SP21-0N模塊的限制。
System Configuration B2.2.1 Components
The FA-M3 Value version (F3SC21-1N) consists of the following components. - F3BU04-0N base module - F3SP05-0P sequence CPU module with a power supply and memory - F3WD64-3N I/O module For details on the specifications of the F3BU04-0N and F3WD64-3N modules and other components, see their respective relevant sections.The F3SP05-0P sequence CPU module with a power supply and memory contains a power supply equivalent to the F3PU10-0N power supply module. This section explains the specifications of this built-in power supply block. Details on the sequence CPU block are explained in the "Sequence CPU – Functions (for F3SP21, F3SP25, F3SP35)" (IM 34M06P12-02E).Concept of Unit Main Unit A unit in which the F3SP08-0P or F3SP08-SP sequence CPU module is installed is referred to as a main unit. Consequently, the F3SC22-xx or F3SC23- xx itself serves as the main unit. Subunit Subunits are used to increase the number of I/O ports. A maximum of seven subunits can be added to the Value II of the FA-M3 system to deal with up to 2048 I/O points. ? Increasing the Number of I/O Points Using Fiber-optic FA-bus Modules You can install fiber-optic FA-bus or FA-bus type 2 modules in both main and subunits and connect them with fiber-optic cables. This enables the distributed arrangement of remote I/O points, increase in the number of I/O points, and control of I/O modules via high-speed, noise-immune communication. The fiber-optic FA-bus or FA-bus type 2 module may be installed in either slot 3 or slot 4. TIP ■ Example of increasing the number of I/O points using FA-bus type 2 modules As with fiber-optic FA-bus type 2 modules, the number of I/O points can be increased using FA-bus type 2 modules. FA-bus type 2 modules use shielded twisted-pair cables for the connection between subunits.
Basic Configuration
The FA-M3 Value II (F3SC22-xx, F3SC23- xx) consists of the following components. See Figure C1.1 for the available models with their respective module configurations. - F3BU04-0N base module - F3SP08-0P sequence CPU module with power supply (with M3.5 screws) and memory - F3SP08-SP sequence CPU module with power supply (with M4 screws) and memory - F3WD32-3F I/O module - F3WD64-3F I/O module - F3WD64-3P I/O module - F3WD64-4P I/O module - F3XD16-3F input module - F3YD14-5A output module Should the FA-M3 Value II fail, it can be fixed by replacing the failed module only. Install the F3SP08-xP sequence CPU module in the leftmost slot of the F3BU04-0N base module and the other I/O modules in slot 2 (or slots 2 and 3). The remaining slots 3 and 4 (or only slot 4) are reserved for a variety of I/O modules available for use with the FA-M3 series. A slot number consists of three digits of which the third digit is the unit number. The unit number 0 is allocated to the main unit.Install the F3SP08-0P sequence CPU in slot 1 for the F3SC22-xx, and install the F3SP08-SP sequence CPU module in slot 1 for the F3SC23- xx. Install the other specified component modules in slot 2 (or slots 2 and 3). You may install FA-M3 I/O modules in the remaining slots. You may not install a CPU module in the remaining slots. For restrictions on the installation of I/O modules, including subunits, refer to Section A1.2, “Restrictions on Module Installation,” as they are equivalent to the restrictions specified for the F3SP21-0N module discussed in that section.
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
